BELHADI Salim | université 8 Mai 1945 Guelma

J’ai obtenu mon Diplôme d’Ingénieur d’Etat en Génie Mécanique Option Fabrication Mécanique en 1994 à l’Université de Annaba. Après avoir réussi le concours d’accès à la post-graduation en plus d’une année d’étude, j’ai réalisé un travail de recherche qui a abouti à l’obtention du diplôme de Magister en génie mécanique Option Fabrication Mécanique en 1997 à l’Université de Annaba.

Sur la base de mon diplôme de Magister, j’ai été recruté en tant que Maître Assistant au sein du département de Génie Mécanique de l’université du 8 mai 1945 de Guelma, le 02 Novembre 1999. J’ai accédé au grade de Chargé de cours en novembre 2002. Après la soutenance de ma thèse de doctorat en juin 2009 à l’université Badji-Mokhtar de Annaba, j’ai accédé au grade de Maître de conférences classe B. Après avoir présenté mon dossier pour une Habilitation Universitaire j'ai fait ma soutenance en Juillet 2019 ce qui m'a permis d'accéder au grade Maitre de Conférences classe A. Lors de la 50ème session j'ai pu accéder au grade de Professeur, que je possède jusqu’à ce jour.

Actuellement je suis membre de l’équipe Coupe des métaux, du Laboratoire de Mécaniques et de Structures de notre Université 8 mai 1945 de Guelma.

Teaching activities

Teaching activities:

Les Cours

Technologie de base, 2ème ST

Planification des expériences, 1ère Mast-CM

Coupe des métaux, 1ère COFFEE

Théorie des Mécanismes, 3ème Lic Const Méca

Les Travaux dirigés

Méthodes Numériques, 2^ème ST

Théorie des Mécanismes, 3^ème Licence Construction Mécanique

Les travaux pratiques

Dessin, 2^ème Licence Electromécanique

Fabrication avancée, 1^ère Master-Construction Mécanique

CFAO, 1^ère COFFEE

Dessin, 3^ème Licence Construction Mécanique & 3^ème Licence Maintenance Industrielle

Coupe des métaux, 1^ère COFFEE

Informatique 3, 2^ème ST

Supervision of students

Supervision of students:

Chiheb Imed eddine

Etude de la rugosité de surface et des vibrations lors de l'usinage d'un alliage réfractaire (Inconel 718) Sept. 2020

Master Construction Mécanique

Zamiti Salah

Application des méthodes MCDM pour l’optimisation de l’usinage d’un acier fortement allié traité Juin 2022

Master Construction Mécanique

Guebailia Lazhar

Etude du comportement à l'usure d'un carbure revêtu lors de l'usinage d'un acier Inoxydable austénitique Juin 2023

Master Construction Mécanique

Bouhamda Rachid

Etude de l’usinage d’un acier inoxydable issu de la fabrication additive durant le tournage. Juin 2024

Master Construction Mécanique

Teaching documents

Teaching documents:

Teaching documents

Research interest

Research interest:

Machining

Optimisation methods

Green machining

Ongoing research project

Ongoing research project:

PRFU

Code : A11N01UN240120190001

« Application des méthodes de l’intelligence artificielle et d’optimisation lors de l’usinage des matériaux métalliques et polymères », 2019-2022

PRFU

Code : A11N01UN240120230001

« Application des méthodes de prise de décision MCDM lors de l'usinage des matériaux modernes dans différents environnement de lubrification »2023-2026

Scientific publications

Scientific publications :

2024

Khelfaoui, F., Yallese, M. A., Boucherit, S., Ouelaa, N., Belhadi, S., & Ben Salem, S. (2024). Assessment of performance parameters in intermittent turning and multi-response optimization of machining conditions using DF, MOORA, VIKOR, and coupled NSGAII-VIKOR methods. The International Journal of Advanced Manufacturing Technology, 130(11), 5665-5691.

Djouambi, N., Yallese, M. A., Kaddeche, M., Belhadi, S., & Hegedűs, G. (2024). Predictive modeling and multi-response optimization of cutting parameters using DF, GRA and MABAC techniques while turning POM-C GF 25% composite polymer. The International Journal of Advanced Manufacturing Technology, 130(3), 1987-2007.

Septi, B., Mounia, K., Salim, B., & Mohamed Athmane, Y. (2024). Evaluation of cutting parameters during dry turning of AISI 304 stainless steel and optimization through a modified WPCA approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241246870.

Tibakh, I., Yallese, M. A., Belhadi, S., & Kaddeche, M. (2024). Multi-response optimisation during face milling of polyoxymethylene copolymer using grey relational analysis and data envelopment analysis based ranking coupled with the Taguchi approach. Advances in Materials and Processing Technologies, 1-26.

Hakmi, T., Hamdi, A., Touggui, Y., Laouissi, A., Belhadi, S., & Yallese, M. A. (2024). Machinability investigation during turning of polyoxymethylene POM-C and optimization of cutting parameters using Pareto analysis, linear regression and genetic algorithm. Archive of Mechanical Engineering.

2023

Haoues, S., Yallese, M. A., Belhadi, S., Chihaoui, S., & Uysal, A. (2023). Modeling and optimization in turning of PA66-GF30% and PA66 using multi-criteria decision-making (PSI, MABAC, and MAIRCA) methods: a comparative study. The International Journal of Advanced Manufacturing Technology, 124(7), 2401-2421.

Hadjela, S., Belhadi, S., Ouelaa, N., Safi, K., & Yallese, M. A. (2023). Straight turning optimization of low alloy steel using MCDM methods coupled with Taguchi approach. The International Journal of Advanced Manufacturing Technology, 124(5), 1607-1621.

Tebassi, H., Yallese, M. A., & Belhadi, S. (2023). Optimization and Machinability Assessment at the Optimal Solutions Across Taguchi OA, GRA, and BBD: An Overall View. Arabian Journal for Science and Engineering, 48(9), 12455-12483.

Chihaoui, S., Meddour, I., AthmaneYallese, M., Belhadi, S., & Safi, K. (2023). Comparative assessment between DFA, NSGA-II coupled with TOPSIS, GRA, and TOPSIS for multiobjective optimization of gray cast iron turning process using CBN insert. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231194039.

Yallese, M. A., Boucherit, S., Kouahla, I., & Belhadi, S. (2023). Multi-objective optimization of inconel 718 turning parameters using PCA-MARCOS and MARCOS-Taguchi. Engineering Research Express, 5(3), 035043.

Boucherıt, S., Yallese, M. A., Kouahla, I., Belhadı, S., & Haddad, A. (2023). Multi-Objective Optimization of the Inconel 718 Turning Parameters Using MARCOS–Based Taguchi S/N ratio. The Eurasia Proceedings of Science Technology Engineering and Mathematics, 26, 366-374.

SAFI, K., YALLESE, M. A., BELHADI, S., MABROUKI, T., & CHIHAOUI, S. Modeling of cutting force and power consumption using ANN and RSM methods in turning of AISI D3: comparative study and precision benefit.

2022

Kouahla, I., Yallese, M. A., Belhadi, S., Safi, K., & Nouioua, M. (2022). Tool vibration, surface roughness, cutting power, and productivity assessment using RSM and GRA approach during machining of Inconel 718 with PVD-coated carbide tool. The International Journal of Advanced Manufacturing Technology, 122(3), 1835-1856.

Safi, K., Yallese, M. A., Belhadi, S., Mabrouki, T., & Laouissi, A. (2022). Tool wear, 3D surface topography, and comparative analysis of GRA, MOORA, DEAR, and WASPAS optimization techniques in turning of cold work tool steel. The International Journal of Advanced Manufacturing Technology, 121(1), 701-721.

Safi, K., Yallese, M. A., Belhadi, S., Mabrouki, T., & Chihaoui, S. (2022). Parametric study and multi-criteria optimization during turning of X210Cr12 steel using the desirability function and hybrid Taguchi-WASPAS method. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(15), 8401-8420.

Boucherit, S., ZAIDI, A., YALLESE, M. A., Belhadi, S., & Kaddeche, M. (2022). RSM modelling, and multi-object optimization of turning parameters for polyamide (PA66) using PCA and PCA coupled with TOPSIS. Mechanics, 28(6), 499-508.

Tebassi, H., Yallese, M. A., & Belhadi, S. (2022). Single and multiple quality characteristics optimization, expanded to the machinability assessment at the optimal cutting combinations across Taguchi OA, GRA and BBD: an overall view.

Scientific conferences

Scientific conferences:

Belhadi, S., & Yallese, M. A. (2020, February). Prediction of Forces Components During the Turning Process of Stellite 6 Material Based on Artificial Neural Networks. In Design and Modeling of Mechanical Systems-IV: Proceedings of the 8th Conference on Design and Modeling of Mechanical Systems, CMSM'2019, March 18–20, Hammamet, Tunisia (p. 399). Springer Nature.

Belhadi, S., & Yallese, M. A. (2020, February). Multi-optimization of Stellite 6 Turning Parameters for Better Surface Quality and Higher Productivity Through RSM and Grey Relational Analysis. In Design and Modeling of Mechanical Systems-IV: Proceedings of the 8th Conference on Design and Modeling of Mechanical Systems, CMSM'2019, March 18–20, Hammamet, Tunisia (p. 382). Springer Nature

Hanane Boumaza, S. Belhadi, Mohamed Athmane Yallese, Ilyas Kouahla (2021), Application of the taguchi-DEAR methodology in multicriteria decision making during the dry turning of Inconel 718, TOKYO SUMMIT-IV 4th international conference on innovative studies of contemporary sciences.

Ben Fathallah, B., Saidi, R., Mabrouki, T., Belhadi, S., & Yallese, M. A. (2020). Multi-optimization of stellite 6 turning parameters for better surface quality and higher productivity through RSM and grey relational analysis. In Design and Modeling of Mechanical Systems-IV: Proceedings of the 8th Conference on Design and Modeling of Mechanical Systems, CMSM'2019, March 18–20, Hammamet, Tunisia (pp. 382-391). Springer International Publishing.

Saidi, R., Fathallah, B. B., Mabrouki, T., Belhadi, S., & Yallese, M. A. (2020). “Prediction of forces components during the turning process of stellite 6 material based on artificial neural networks”. In Design and Modeling of Mechanical Systems-IV: Proceedings of the 8th Conference on Design and Modeling of Mechanical Systems, CMSM'2019, March 18–20, Hammamet, Tunisia (pp. 399-408). Springer International Publishing.

Hadjela S., Belhadi, S., & Yallese, M. A. “Modelling and optimization of cutting parameters during the machining of AIS1 4140 using RSM and EDAS method”, 1^st National Conference on Materials Sciences and Engineering Abbes LAGHROUR University, Khenchela, MSE'22, June 28 & 29\, 2022

Touggui Y., Belhadi, S., & Yallese, M. A “ Multi-Criteria Optimization of Process Parameters in Dry Turning of AISI 304L Stainless Steel Based on Decision Making Methods”, The First National Conference on Mechanical Engineering, NCME’23 Batna, 10 mai 2023

Scientific activities

Scientific activities :

Scientific activities

Collaboration and network

Collaboration and network:

Collaboration avec Pr T. MABROUKI, Professeur à l’Ecole National des Ingénieurs de Tunis. laboratoire de Mécanique Appliquée et Ingénierie (MAI, LR-11-ES-19).

Honor and distinction

Honor and distinction:

Honor and distinction

Community services

Community services:

Community services