yallese Mohamed Athmane

Research Keywords:

Machinability, optimization, Modeling, MQL, Materials, hard turning, Machining of polymers

Rank:

Professor

Department:

Department of Mechanical Engineering

Faculty:

Faculty of Sciences and Technology

Campus: Ancien Campus

Google Scholar Link:

https://scholar.google.fr/citations?hl=fr&pli=1&user=l6keDDsAAAAJ

Rersearchgate Link:

https://www.researchgate.net/profile/Mohamed_Yallese

Scopus profile:

https://www.scopus.com/authid/detail.uri?authorId=16641654800

Vertical Tabs

Biography and positions

Biography and positions :

Biography and positions

Teaching activities

Teaching activities:

Teaching activities

Supervision of students

Supervision of students:

Encadrements

Doctorat

-2019 : LAOUISSI, A. Etude du frottement et de l’usure du couple fonte/carbure-céramique. Modélisation et optimisation des paramètres d’usures.

-2019 : NOUIOUA, M. Optimisation des paramètres de coupe lors de l’usinage à sec et avec une quantité minimale de lubrification

-2018 : CHABBI, A. Modélisation et optimisation des paramètres d’usinage lors du tournage du polyacétal POM C.

-2018 : ZERTI, O. Investigation expérimentale et analyse multi-objective lors du tournage de l’acier AISI D3 en utilisant les méthodes RSM, ANN, Taguchi et GRA.

-2018 : ZERTI, A. Investigation expérimentale et analyse multi-objective lors du tournage de l’acier AISI D3 en utilisant les méthodes RSM, ANN, Taguchi et GRA.

-2018 : LABIDI, A. Étude de l’évaluation de l’usinabilité d’un acier à outil pour travail à froid X210Cr12 avec une céramique mixte Al2O3/TiC utilisant différentes méthodes statistique.

-2017 : Selaïmia, A. A. Etude de l’usinage des aciers inoxydables lors du fraisage de face.

-2017 : FNIDES, M. Etude de l’impact des conditions d’usinage sur la rugosité de surface et des vibrations lors de fraisage de face.

-2016 : H. TEBBASSI. Investigation expérimentale sur le comportement à l’usure des outils de coupe, lors de l’usinage des superalliages réfractaires.

-2015 : BOUZID, L. Optimisation des conditions de coupe et analyse de leur effet sur les paramètres technologiques d’usinage-Application à l’usinage de l’acier inoxydable X20Cr13.

-2015 : ELBAH, M. Investigation expérimental sur l’effet de la géométrie de l’outil et des conditions de coupe en tournage en utilisant les techniques statistique.

-2015 : MEDDOUR, I. Prédiction de la rugosité de surface des efforts de coupe et des vibrations de l’outil en tournage dur par les méthodes RSM et ANN-Application au couple : AL2O3+ TiC/100Cr6.

-2015 : BERKANI, S. Comportement des carbures métalliques lors de l’usinage des aciers inoxydables: Application aux austénitiques et martensitiques.

-2014 : AZIZI, M. W. Utilisation des plans d’expériences en TD pour quantifier l’influence des paramètres de coupe sur les indicateurs de performance d’usinage.

-2014 : FNIDES, B. Étude expérimental sur le comportement des outils de coupe en tournage des aciers pour travail a chaud.

-2014 : HESSAINIA, Z. Etude de l’impact des paramètres affectant la rugosité des surfaces et les efforts de coupe en usinage des pièces traitées thermiquement.

-2012 : AOUICI, H. Étude de l’Usinabilité de l’acier AISI H11 a l’état traité par le CBN7020.

-2011 : BOUCHELAGHEM, H. Etude du comportement des outils CBN lors de l’usinage de l’acier fortement allie AISI D3.

-2011 : BOUACHA, K. Comportement du couple outil-matière lors de l’usinage des matériaux durs.

Magister

-2013 : ZAIDI, A. Contribution à l’étude de l’usinage des matériaux polymères.

-2012 : LABIDI, A. Prédiction de l'usure et de la durée de vie des outils de coupe lors du tournage des aciers.

-2012 : KAHOUL, N. Evaluation des performances des matériaux de coupe lors de l’usinage de la fonte grise Ft25.

-2009 : TEBASSI, H. Etude de l’usinabilité de l’Inconel 718.

-2009 : BERKANI, S. Etude du comportement des matériaux de coupe lors du tournage d’un acier inoxydable

-2009 : Selaïmia, A-Ali. Contribution a l’étude de l’usinabilité des alliages ferreux en fraisage.

-2009 : MEDDOUR, I. Optimisation des conditions de coupe par l’analyse statique et dynamique lors du tournage des pièces déformables.

-2008 : HAMDI, A. Etude du comportement du Nitrure de Bore Cubique lors du tournage dur des aciers pour travail à chaud.

-2008 : HESSAINIA, Z. Contribution a l’étude des facteurs affectant la rugosité des surfaces en usinage dur.

-2008 : FNIDES, B. Evaluation des performances des matériaux de coupe lors de l’usinage de l’acier X38CrMoV5-1.

Thèses en cours

-CHERAFA HAMZA. Etude expérimentale et modélisation des paramètres de coupe lors de l’usinage d’un matériau polymère composite renforcé de fibres de verre (GFRP).

-CHIHAOUI SALIM. Etude des performances des outils en nitrure de bore cubique lors de l’usinage des fontes-Approche statiques et techno-économiques.

-KHELLAF AHMED. Etude comparative des méthodes de modélisation et d’optimisation lors du tournage des pièces difficilement usinable.

-ZAIDI AHMED. Investigation expérimentale et modélisation du processus de coupe en utilisant les plans d’expériences - application lors du tournage du polyamid.

-SAFI KHAOULA. Etude statistique des performances des matériaux de coupe avec et sans revêtements lors du tournage dans un environnement à sec et lubrifié.

-KOUAHLA ILYES. Modélisation vibration de l’outil de coupe, de l’usure et de la rugosité des surfaces usinées lors de l’usinage de l’inconel 718 par le carbure métallique.

Teaching documents

Teaching documents:

Teaching documents

Research interest

Research interest:

Research interest

Ongoing research project

Ongoing research project:

Research interest

Scientific publications

Scientific publications :

Publications Internationales et Nationales

2020

1-Frifita, W., Salem, S. B., Haddad, A., & Yallese, M. A. (2020). Optimization of machining parameters in turning of Inconel 718 Nickel-base super alloy. Mechanics & Industry, 21(2), 203.

https://www.mechanics-industry.org/articles/meca/abs/2020/02/mi190203/mi190203.html

2019

1-Elbah, M., Laouici, H., Benlahmidi, S., Nouioua, M., & Yallese, M. A. (2019). Comparative assessment of machining environments (dry, wet and MQL) in hard turning of AISI 4140 steel with CC6050 tools. The International Journal of Advanced Manufacturing Technology, 105(5-6), 2581-2597. https://link.springer.com/article/10.1007/s00170-019-04403-9

2-Zerti, A., Yallese, M. A., Zerti, O., Nouioua, M., & Khettabi, R. (2019). Prediction of machining performance using RSM and ANN models in hard turning of martensitic stainless steel AISI 420. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233(13), 4439-4462.

3-Zerti, A., Yallese, M. A., Meddour, I., Belhadi, S., Haddad, A., & Mabrouki, T. (2019). Modeling and multi-objective optimization for minimizing surface roughness, cutting force, and power, and maximizing productivity for tempered stainless steel AISI 420 in turning operations. The International Journal of Advanced Manufacturing Technology, 102(1-4), 135-157. https://link.springer.com/article/10.1007/s00170-018-2984-8

4-Laouissi, A., Yallese, M. A., Belbah, A., Khellaf, A., & Haddad, A. (2019). Comparative study of the performance of coated and uncoated silicon nitride (Si 3 N 4) ceramics when machining EN-GJL-250 cast iron using the RSM method and 2D and 3D roughness functional parameters. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(5), 205.https://link.springer.com/article/10.1007/s00170-018-2984-8

5-Laouissi, A., Yallese, M. A., Belbah, A., Belhadi, S., & Haddad, A. (2019). Investigation, modeling, and optimization of cutting parameters in turning of gray cast iron using coated and uncoated silicon nitride ceramic tools. Based on ANN, RSM, and GA optimization. The International Journal of Advanced Manufacturing Technology, 101(1-4), 523-548. https://link.springer.com/article/10.1007/s00170-018-2931-8

6-Saidi, R., Fathallah, B. B., Mabrouki, T., Belhadi, S., & Yallese, M. A. (2019). Modeling and optimization of the turning parameters of cobalt alloy (Stellite 6) based on RSM and desirability function. The International Journal of Advanced Manufacturing Technology, 100(9-12), 2945-2968. https://link.springer.com/article/10.1007/s00170-018-2816-x

7-Boucherit, S., Berkani, S., Yallese, M. A., Haddad, A., & Belhadi, S. (2019). Dry turning of X2CrNi18-09 using coated carbide tools: modelling and optimization of multiple performance characteristics. Mechanics, 25(6), 487-500. http://www.mechanika.ktu.lt/index.php/Mech/article/view/22367

8-Fathallah, B., Saidi, R., Dakhli, C., Belhadi, S., & Yallese, M. (2019). Mathematical modelling and optimization of surface quality and productivity in turning process of AISI 12L14 free-cutting Steel. International Journal of Industrial Engineering Computations, 10(4), 557-576. http://m.growingscience.com/beta/ijiec/3205-mathematical-modelling-and-optimization-of-surface-quality-and-productivity-in-turning-process-of-aisi-12l14-free-cutting-steel.html

9-Aouici, H., Elbah, M., Benkhelladi, A., Fnides, B., Boulanouar, L., & Yallese, M. A. (2019). Comparison on various machinability aspects between mixed and reinforced ceramics when machining hardened steels. Mechanics & Industry, 20(1), 109. https://www.mechanics-industry.org/articles/meca/abs/2019/01/mi150047/mi150047.html

2018

1-Labidi, A., Tebassi, H., Belhadi, S., Khettabi, R., & Yallese, M. A. (2018). Cutting conditions modeling and optimization in hard turning using RSM, ANN and desirability function. Journal of Failure Analysis and Prevention, 18(4), 1017-1033. https://link.springer.com/article/10.1007/s11668-018-0501-x

2-Meddour, I., Yallese, M. A., Bensouilah, H., Khellaf, A., & Elbah, M. (2018). Prediction of surface roughness and cutting forces using RSM, ANN, and NSGA-II in finish turning of AISI 4140 hardened steel with mixed ceramic tool. The International Journal of Advanced Manufacturing Technology, 97(5-8), 1931-1949. https://link.springer.com/article/10.1007/s00170-018-2026-6

3-Bouzid, L., Berkani, S., Yallese, M., Girardin, F., & Mabrouki, T. (2018). Estimation and optimization of flank wear and tool lifespan in finish turning of AISI 304 stainless steel using desirability function approach. International Journal of Industrial Engineering Computations, 9(3), 349-368. http://growingscience.com/beta/ijiec/2650-estimation-and-optimization-of-flank-wear-and-tool-lifespan-in-finish-turning-of-aisi-304-stainless-steel-using-desirability-function-approach.html

4-Zerti, O., Yallese, M., Zerti, A., Belhadi, S., & Girardin, F. (2018). Simultaneous improvement of surface quality and productivity using grey relational analysis based Taguchi design for turning couple (AISI D3 steel/mixed ceramic tool (Al2O3+ TiC)). International Journal of Industrial Engineering Computations, 9(2), 173-194. http://growingscience.com/beta/ijiec/2606-simultaneous-improvement-of-surface-quality-and-productivity-using-grey-relational-analysis-based-taguchi-design-for-turning-couple-aisi-d3-steel-mixed-ceramic-tool-al2o3-tic.html

2017

1-Nouioua, M., Yallese, M. A., Khettabi, R., Belhadi, S., Bouhalais, M. L., & Girardin, F. (2017). Investigation of the performance of the MQL, dry, and wet turning by response surface methodology (RSM) and artificial neural network (ANN). The International Journal of Advanced Manufacturing Technology, 93(5-8), 2485-2504. https://link.springer.com/article/10.1007/s00170-017-0589-2

2-Selaimia, A. A., Yallese, M. A., Bensouilah, H., Meddour, I., Khattabi, R., & Mabrouki, T. (2017). Modeling and optimization in dry face milling of X2CrNi18-9 austenitic stainless steel using RMS and desirability approach. Measurement, 107, 53-67. https://www.sciencedirect.com/science/article/pii/S0263224117302907

3-Hamlaoui, N., Azzouz, S., Chaoui, K., Azari, Z., & Yallese, M. A. (2017). Machining of tough polyethylene pipe material: surface roughness and cutting temperature optimization. The International Journal of Advanced Manufacturing Technology, 92(5-8), 2231-2245. https://link.springer.com/article/10.1007/s00170-017-0275-4

4-Nouioua, M., Yallese, M. A., Khettabi, R., Belhadi, S., & Mabrouki, T. (2017). Comparative assessment of cooling conditions, including MQL technology on machining factors in an environmentally friendly approach. The International Journal of Advanced Manufacturing Technology, 91(9-12), 3079-3094. https://link.springer.com/article/10.1007/s00170-016-9958-5

5-Chabbi, A., Yallese, M. A., Nouioua, M., Meddour, I., Mabrouki, T., & Girardin, F. (2017). Modeling and optimization of turning process parameters during the cutting of polymer (POM C) based on RSM, ANN, and DF methods. The International Journal of Advanced Manufacturing Technology, 91(5-8), 2267-2290. https://link.springer.com/article/10.1007/s00170-016-9858-8

6-Nouioua, M., Yallese, M. A., Khettabi, R., Chabbi, A., Mabrouki, T., & Girardin, F. (2017, March). Optimization of Machining Process During Turning of X210Cr12 Steel Under MQL Cooling as a Key Factor in Clean Production. In International Conference Design and Modeling of Mechanical Systems (pp. 855-863). Springer, Cham. https://link.springer.com/chapter/10.1007/978-3-319-66697-6_83

7-Zerti, O., Yallese, M. A., Khettabi, R., Chaoui, K., & Mabrouki, T. (2017). Design optimization for minimum technological parameters when dry turning of AISI D3 steel using Taguchi method. The International Journal of Advanced Manufacturing Technology, 89(5-8), 1915-1934. https://link.springer.com/article/10.1007/s00170-016-9162-7

8-Benlahmidi, S., Aouici, H., Boutaghane, F., Khellaf, A., Fnides, B., & Yallese, M. A. (2017). Design optimization of cutting parameters when turning hardened AISI H11 steel (50 HRC) with CBN7020 tools. The International Journal of Advanced Manufacturing Technology, 89(1-4), 803-820. https://link.springer.com/article/10.1007/s00170-016-9121-3

9-Khellaf, A., Aouici, H., Smaiah, S., Boutabba, S., Yallese, M. A., & Elbah, M. (2017). Comparative assessment of two ceramic cutting tools on surface roughness in hard turning of AISI H11 steel: including 2D and 3D surface topography. The International Journal of Advanced Manufacturing Technology, 89(1-4), 333-354. https://link.springer.com/article/10.1007/s00170-016-9077-3

10-Bouzid, L., Yallese, M. A., & Maaoui, S. (2017). La modélisation en usinage: étude comparative: Comparaison entre les modèles prédictifs de la coupe en utilisant les approches RSM et RNA. Éditions universitaires européennes. http://bib.univ-oeb.dz:8080/jspui/handle/123456789/7690

11-Keblouti, O., Boulanouar, L., Azizi, M. W., & Yallese, M. A. (2017). Effects of coating material and cutting parameters on the surface roughness and cutting forces in dry turning of AISI 52100 steel. Struct. Eng. Mech., 519-526. https://doi.org/10.12989/sem.2017.61.4.519

12-Keblouti, O., Boulanouar, L., Azizi, M., & Athmane, M. (2017). Modeling and multi-objective optimization of surface roughness and productivity in dry turning of AISI 52100 steel using (TiCN-TiN) coating cermet tools. International Journal of Industrial Engineering Computations, 8(1), 71-84. http://m.growingscience.com/beta/ijiec/2354-modeling-and-multi-objective-optimization-of-surface-roughness-and-productivity-in-dry-turning-of-aisi-52100-steel-using-ticn-tin-coating-cermet-tools.html

13-Fnides, M., Yallese, M. A., Khattabi, R., Mabrouki, T., & Girardin, F. (2017). Modeling and optimization of surface roughness and productivity thru RSM in face milling of AISI 1040 steel using coated carbide inserts. International Journal of Industrial Engineering Computations, 8(4), 493-512. https://www.ingentaconnect.com/content/doaj/19232926/2017/00000008/00000004/art00006;jsessionid=1gonnsb37p17e.x-ic-live-01

14-Tebassi, H., Yallese, M., Belhadi, S., Girardin, F., & Mabrouki, T. (2017). Quality-productivity decision making when turning of Inconel 718 aerospace alloy: A response surface methodology approach. International Journal of Industrial Engineering Computations, 8(3), 347-362. http://m.growingscience.com/beta/ijiec/2455-quality-productivity-decision-making-when-turning-of-inconel-718-aerospace-alloy-a-response-surface-methodology-approach.html

15-Tebassi, H., Yallese, M. A., Meddour, I., Girardin, F., & Mabrouki, T. (2017). On the modeling of surface roughness and cutting force when turning of Inconel 718 using artificial neural network and response surface methodology: accuracy and benefit. Periodica Polytechnica Mechanical Engineering, 61(1), 1-11.

16-Chabbi, A., Yallese, M. A., Meddour, I., Nouioua, M., Mabrouki, T., & Girardin, F. (2017). Predictive modeling and multi-response optimization of technological parameters in turning of Polyoxymethylene polymer (POM C) using RSM and desirability function. Measurement, 95, 99-115. https://www.sciencedirect.com/science/article/pii/S0263224116305462

17-Zerti, O., Yallese, M. A., Belhadi, S., & Bouzid, L. (2017). Taguchi design of experiments for optimization and modeling of surface roughness when dry turning X210Cr12 steel. In Applied Mechanics, Behavior of Materials, and Engineering Systems (pp. 275-288). Springer, Cham. https://link.springer.com/chapter/10.1007/978-3-319-41468-3_22

18-Bouzid, L., Yallese, M. A., Belhadi, S., & Boulanouar, L. (2017). Tool Life Evaluation of Cutting Materials in Turning of X20Cr13 Stainless Steel. In Applied Mechanics, Behavior of Materials, and Engineering Systems (pp. 447-452). Springer, Cham. https://link.springer.com/chapter/10.1007/978-3-319-41468-3_37

19-Aouici, H., Khellaf, A., Smaiah, S., Elbah, M., Fnides, B., & Yallese, M. A. (2017). Comparative assessment of coated and uncoated ceramic tools on cutting force components and tool wear in hard turning of AISI H11 steel using Taguchi plan and RMS. Sādhanā, 42(12), 2157-2170. https://link.springer.com/article/10.1007/s12046-017-0746-1

2016

1-Aouici, H., Elbah, M., Yallese, M. A., Fnides, B., Meddour, I., & Benlahmidi, S. (2016). Performance comparison of wiper and conventional ceramic inserts in hard turning of AISI 4140 steel: analysis of machining forces and flank wear. The International Journal of Advanced Manufacturing Technology, 87(5-8), 2221-2244. https://link.springer.com/article/10.1007/s00170-016-8567-7

2-Belhadi, S., Kaddeche, M., Chaoui, K., & Yallese, M. A. (2016). Machining optimization of HDPE pipe using the Taguchi method and Grey relational analysis. International Polymer Processing, 31(4), 491-502.

3-Bensouilah, H., Aouici, H., Meddour, I., Yallese, M. A., Mabrouki, T., & Girardin, F. (2016). Performance of coated and uncoated mixed ceramic tools in hard turning process. Measurement, 82, 1-18. https://www.sciencedirect.com/science/article/pii/S0263224115006843

4-Elbah, M., Aouici, H., Meddour, I., Yallese, M. A., & Boulanouar, L. (2016). Application of response surface methodology in describing the performance of mixed ceramic tool when turning AISI 4140 steel. Mechanics & Industry, 17(3), 309. https://www.mechanics-industry.org/articles/meca/abs/2016/03/mi150103/mi150103.html

5-Aouici, H., Fnides, B., Elbah, M., Benlahmidi, S., Bensouilah, H., & Yallese, M. (2016). Surface roughness evaluation of various cutting materials in hard turning of AISI H11. International Journal of Industrial Engineering Computations, 7(2), 339-352. http://growingscience.com/beta/ijiec/2144-surface-roughness-evaluation-of-various-cutting-materials-in-hard-turning-of-aisi-h11.html

6-Tebassi, H., Yallese, M., & Meddour, I. (2016). A new method for evaluation nominal coefficient of friction and frictional forces in turning and inserts characterization using cutting forces profiles. Engineering Solid Mechanics, 4(1), 1-10. http://m.growingscience.com/beta/esm/2117-a-new-method-for-evaluation-nominal-coefficient-of-friction-and-frictional-forces-in-turning-and-inserts-characterization-using-cutting-forces-profiles.html

7-Tebassi, H., Yallese, M., Khettabi, R., Belhadi, S., Meddour, I., & Girardin, F. (2016). Multi-objective optimization of surface roughness, cutting forces, productivity and Power consumption when turning of Inconel 718. International Journal of Industrial Engineering Computations, 7(1), 111-134. http://growingscience.com/beta/ijiec/2077-multi-objective-optimization-of-surface-roughness-cutting-forces-productivity-and-power-consumption-when-turning-of-inconel-718.html

2015

1-Meddour, I., Yallese, M. A., Khattabi, R., Elbah, M., & Boulanouar, L. (2015). Investigation and modeling of cutting forces and surface roughness when hard turning of AISI 52100 steel with mixed ceramic tool: cutting conditions optimization. The International Journal of Advanced Manufacturing Technology, 77(5-8), 1387-1399. https://link.springer.com/article/10.1007/s00170-014-6559-z

2-Zahia, H., Athmane, Y., Lakhdar, B., & Tarek, M. (2015). On the application of response surface methodology for predicting and optimizing surface roughness and cutting forces in hard turning by PVD coated insert. International Journal of Industrial Engineering Computations, 6(2), 267-284. http://growingscience.com/beta/ijiec/1860-on-the-application-of-response-surface-methodology-for-predicting-and-optimizing-surface-roughness-and-cutting-forces-in-hard-turning-by-pvd-coated-insert.html

3-Berkani, S., Yallese, M., Boulanouar, L., & Mabrouki, T. (2015). Statistical analysis of AISI304 austenitic stainless steel machining using Ti (C, N)/Al2O3/TiN CVD coated carbide tool. International Journal of Industrial Engineering Computations, 6(4), 539-552. http://m.growingscience.com/beta/ijiec/2018-statistical-analysis-of-aisi304-austenitic-stainless-steel-machining-using-tic-n-al2o3-tin-cvd-coated-carbide-tool.html

4-Kribes, N., Hessainia, Z., & Yallese, M. A. (2015). Optimisation of Machining Parameters in Hard Turning by Desirability Function Analysis Using Response Surface Methodology. In Design and Modeling of Mechanical Systems-II (pp. 73-81). Springer, Cham. https://link.springer.com/chapter/10.1007/978-3-319-17527-0_8

5-Bouzid, L., Yallese, M. A., Chaoui, K., Mabrouki, T., & Boulanouar, L. (2015). Mathematical modeling for turning on AISI 420 stainless steel using surface response methodology. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229(1), 45-61.

2014

1-Meddour, I., Yallese, M. A., & Aouici, H. (2014, December). Investigation and modeling of surface roughness of hard turned AISI 52100 steel: Tool vibration consideration. In Conference on Multiphysics Modelling and Simulation for Systems Design (pp. 419-431). Springer, Cham. https://link.springer.com/chapter/10.1007/978-3-319-14532-7_43

2-Aouici, H., Bouchelaghem, H., Yallese, M. A., Elbah, M., & Fnides, B. (2014). Machinability investigation in hard turning of AISI D3 cold work steel with ceramic tool using response surface methodology. The International Journal of Advanced Manufacturing Technology, 73(9-12), 1775-1788. https://link.springer.com/article/10.1007/s00170-014-5950-0

3-Bouacha, K., Yallese, M. A., Khamel, S., & Belhadi, S. (2014). Analysis and optimization of hard turning operation using cubic boron nitride tool. International Journal of Refractory Metals and Hard Materials, 45, 160-178. https://www.sciencedirect.com/science/article/pii/S0263436814000717

4-Bouzid, L., Yallese, M. A., Belhadi, S., Mabrouki, T., & Boulanouar, L. (2014). RMS-based optimisation of surface roughness when turning AISI 420 stainless steel. International Journal of Materials and Product Technology, 49(4), 224-251.

2013

1-Elbah, M., Yallese, M. A., Aouici, H., Mabrouki, T., & Rigal, J. F. (2013). Comparative assessment of wiper and conventional ceramic tools on surface roughness in hard turning AISI 4140 steel. Measurement, 46(9), 3041-3056. https://www.sciencedirect.com/science/article/pii/S0263224113002510

2-Fnides, B., Boutabba, S., Fnides, M., Aouici, H., & Yallese, M. A. (2013). Tool life evaluation of cutting materials in hard turning of AISI H11. Estonian Journal of Engineering, 19(2), 143.

3-Aouici, H., Yallese, M. A., Belbah, A., Ameur, M. F., & Elbah, M. (2013). Experimental investigation of cutting parameters influence on surface roughness and cutting forces in hard turning of X38CrMoV5-1 with CBN tool. Sadhana, 38(3), 429-445. https://link.springer.com/article/10.1007/s12046-013-0147-z

4-Hessainia, Z., Belbah, A., Yallese, M. A., Mabrouki, T., & Rigal, J. F. (2013). On the prediction of surface roughness in the hard turning based on cutting parameters and tool vibrations. Measurement, 46(5), 1671-1681. https://www.sciencedirect.com/science/article/pii/S0263224112005064

5-Zahia, H., Nabil, K., Yalles, M. A., Mabrouki, T., Ouelaa, N., & Rigal, J. F. (2013). Turning roughness model based on tool-nose displacements. Mechanics, 19(1), 112-119. http://www.mechanika.ktu.lt/index.php/Mech/article/view/3612

6-Fnides, B., Boutabba, S., Fnides, M., Aouici, H., & Yallese, M. A. (2013). Cutting tools flank wear and productivity investigation in straight turning of X38CrMoV5-1 (50 HRC). International Journal of Applied Engineering and Technology, 3(1), 1-10.

2012

1-Azizi, M. W., Belhadi, S., Yallese, M. A., Mabrouki, T., & Rigal, J. F. (2012). Surface roughness and cutting forces modeling for optimization of machining condition in finish hard turning of AISI 52100 steel. Journal of mechanical science and technology, 26(12), 4105-4114. https://link.springer.com/article/10.1007/s12206-012-0885-6

2-Nabil, K., Zahia, H., Yalles, M. A., & Ouelaa, N. (2012). Statistical analysis of surface roughness by design of experiments in hard turning. Mechanics, 18(5), 605-611. http://www.mechanika.ktu.lt/index.php/Mech/article/view/2704

3-Aouici, H., Yallese, M. A., Chaoui, K., Mabrouki, T., & Rigal, J. F. (2012). Analysis of surface roughness and cutting force components in hard turning with CBN tool: Prediction model and cutting conditions optimization. Measurement, 45(3), 344-353. https://www.sciencedirect.com/science/article/pii/S0263224111004180

4-Fnides, B., Berkani, S., Yallese, M. A., Boutabba, S., Rigal, J. F., & Daffrid, S. (2012). Analysis of technological parameters through response surface methodology in machining hardened X38CrMoV5-1 using whisker ceramic tool (Al 2 O 3+ SiC). Estonian Journal of Engineering, 18(1).

5-Kaddeche, M., Chaoui, K., & Yallese, M. A. (2012). Cutting parameters effects on the machining of two high-density polyethylene pipes resins: Cutting parameters effects on HDPE machining. Mechanics & Industry, 13(5), 307-316. https://www.cambridge.org/core/journals/mechanics-and-industry/article/cutting-parameters-effects-on-the-machining-of-two-high-density-polyethylene-pipes-resins/A82BDD917D1238680B1444C221D41549

2011

1-Aouici, H., Yallese, M. A., Fnides, B., Chaoui, K., & Mabrouki, T. (2011). Modeling and optimization of hard turning of X38CrMoV5-1 steel with CBN tool: Machining parameters effects on flank wear and surface roughness. Journal of mechanical science and technology, 25(11), 2843-2851. https://link.springer.com/article/10.1007/s12206-011-0807-z

2-Fnides, B., Yallese, M. A., Mabrouki, T., & Rigal, J. F. (2011). Application of response surface methodology for determining cutting force model in turning hardened AISI H11 hot work tool steel. Sadhana, 36(1), 109. https://link.springer.com/article/10.1007/s12046-011-0007-7

2010

1-Bouchelaghem, H., Yallese, M. A., Mabrouki, T., Amirat, A., & Rigal, J. F. (2010). Experimental investigation and performance analyses of CBN insert in hard turning of cold work tool steel (D3). Machining Science and Technology, 14(4), 471-501. https://www.tandfonline.com/doi/abs/10.1080/10910344.2010.533621

2-Bouacha, K., Yallese, M. A., Mabrouki, T., & Rigal, J. F. (2010). Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool. International Journal of Refractory Metals and Hard Materials, 28(3), 349-361. https://www.sciencedirect.com/science/article/pii/S0263436809001632

3-Aouici, H., Yallese, M. A., Fnides, B., & Mabrouki, T. (2010). Machinability investigation in hard turning of AISI H11 hot work steel with CBN tool. Mechanics, 86(6), 71-77.http://www.mechanika.ktu.lt/index.php/Mech/article/view/15967

2009

1-Yallese, M. A., Chaoui, K., Zeghib, N., Boulanouar, L., & Rigal, J. F. (2009). Hard machining of hardened bearing steel using cubic boron nitride tool. Journal of materials processing technology, 209(2), 1092-1104. https://www.sciencedirect.com/science/article/pii/S0924013608002355

2-Fnides, B., Yallese, M. A., Mabrouki, T., & Rigal, J. F. (2009). Surface roughness model in turning hardened hot work steel using mixed ceramic tool. Mechanics, 77(3), 68-73. http://www.mechanika.ktu.lt/index.php/Mech/article/view/15225

3-M.A.Yallese, H.Bouchelaghem, S.Belhadi, K.Bouacha, N.Kribes, Investigation expérimentale sur les efforts et la température de coupe en tournage dur, Communication Science & Technologie n° 7. Janvier 2009 COST.

2008

1-Fnides, B., Yallese, M. A., & Aouici, H. (2008). Comportement à l'usure des céramiques de coupe (Al2O3+ TiC et Al2O3+ SiC) en tournage des pièces trempées. Algerian Journal of Advanced Materials, 5, 121-124.

2-Fnides, B., Yallese, M. A., & Aouici, H. (2008). Hard turning of hot work steel AISI H11: Evaluation of cutting pressures, resulting force and temperature. Mechanics, 72(4), 59-63. http://www.mechanika.ktu.lt/index.php/Mech/article/view/15096

3-Fnides, B., & Yallese, M. A. (2008). Cutting forces and surface roughness in hard turning of hot work steel X38CrMoV5-1 using mixed ceramic. Mechanics, 70(2), 73-78. http://www.mechanika.ktu.lt/index.php/Mech/article/view/15096

4-Fnides B, Yallese M A, Aouici H, Comportement à l’usure des céramiques de coupe (Al₂O₃+TiC et Al₂O₃+SiC) en tournage des pièces trempées, Algerian Journal of Advanced Materials, Vol 5, 121(2008), 121-124.

2007

1-Yallese, M. A., Bouchelaghem, H., Belhadi, S., & Kribes, N. (2007). Investigation expérimentale sur l’usure des outils de coupe en CBN lors du tournage des pieces dures. Sciences & Technologie. B, Sciences de l'ingénieur, (26), 15-22. http://revue.umc.edu.dz/index.php/b/article/view/201

2-Kribes, N. r, Ouelaa, N., Yallese, M. A., & Belhadi, S. (2007). Impact of cutting parameters and vibrations on surface roughness based on the linear multiple regression. MATERIAUX & TECHNIQUES, 95(3), 197-203. https://www.mattech-journal.org/articles/mattech/abs/2007/03/mt07031/mt07031.html

3-Yallese, M. A., Boulanouar, L., Zeghib, N., Belhadi, S., & Rigal, J. (2007). Etude des efforts et de la température de coupe lors de tournage dur de l’acier AISI 52100 par un outil CBN. Synthèse : Revue des Sciences et de la Technologie, 16, 74-86. https://www.ajol.info/index.php/srst/article/view/117842

4-Bouchelaghem, H., Yallese, M. A., Amirat, A., & Belhadi, S. (2007). Wear behaviour of CBN tool when turning hardened AISI D3 steel. Mechanics, 65(3), 57-65.

5-Yallese M. A, Boulanouar .L, Belhadi .S, Ouelaa .N, Influence des conditions d’usinage sur les efforts de coupe lors du tournage du 100Cr6 (60HRC) avec le CBN. Science & Technologie b – n°25, juin 2007, 7-13.

6-M.A. Yallese, H. Bouchelaghem, S. Belhadi, N. Kribes, Investigation expérimentale sur l’usure des outils de coupe en CBN lors du tournage des pièces dures. Sciences & Technologie b – n°26, décembre (2007), pp 15-22. http://revue.umc.edu.dz/index.php/b/article/view/201

7- Yallese M A, Boulanouar L, Zeghib N, Rigal J-F, Etude des efforts et de la température de coupe lors de tournage dur de l’acier AISI 52100 par un outil CBN. Revue Synthèse, n°16 juin 2007 pp 74-86. https://www.ajol.info/index.php/srst/article/view/117842

8- Belhadi .S, Boulanouar L, Yallese M A, Mabrouki .T, Rigal J-F, Prédiction de la formation du copeau en dents de scie par mesure des efforts. Revue Sciences, Technologies et Développement, n°02, 2007, pp 518.

2005

1-Yallese, M. A., Rigal, J. F., Chaoui, K., & Boulanouar, L. (2005). The effects of cutting conditions on mixed ceramic and cubic boron nitride tool wear and on surface roughness during machining of X200Cr12 steel (60 HRC). Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 219(1), 35-55.

2004

1-Yallese, M. A., Boulanouar, L., & Chaoui, K. (2004). Usinage de l'acier 100Cr6 trempé par un outil en nitrure de bore cubique. Mechanics & Industry, 5(4), 355-368. https://www.cambridge.org/core/journals/mechanics-and-industry/article/usinage-de-lacier-100cr6-trempe-par-un-outil-en-nitrure-de-bore cubique/12D5DA4AC9E35F7BBC195DF71B55487D

2003

1-BOULANOUAR, L., YALLESE, M., & BELHADI, S. (2003). INVESTIGATION DE L’USURE DE DEUX MATERIAUX A OUTILS A BASE D’ALUMINE-SiCw ET DE CBN-TiCN LORS DE L’USINAGE D’UN ACIER A ROULEMENT 60HRC. Sciences & Technologie. B, Sciences de l'ingénieur, (20), 92-99. http://193.194.84.141/index.php/b/article/view/1264

2-Yallese, M., Boulanouar, L., & Belhadi, S. (2003). Etude de l’endommagement des outils de coupe en céramique noire et en CBN lors du tournage d’un acier durci. Revue de, 1(5), 323-339.

3-M.A. YALLESE, L.BOULANOUAR et S. BELHADI, Endommagement des outils de coupe en céramique (Al₂O₃ +TiC) et en CBN lors de l’usinage de l’acier trempé X200Cr12. Communication science et technologie, COST- N°2 Décembre 2003.

4- M.A. YALLESE, L.BOULANOUAR et S.BELHADI, Investigation de l’usure de matériaux à outils à base d’alumine-SiC_wet de CBN-TiCN lors de l’usinage d’un acier à roulement (60HRC) Science et technologie N°20, Décembre 2003, pp 92-99. http://193.194.84.141/index.php/b/article/view/1264

2002

1-YALLESE, M., & BOULANOUAR, L. (2002). ETUDE COMPARATIVE DU COMPORTEMENT A L’USURE DE CERTAINES NUANCES DE CERAMIQUE DE COUPE EN TOURNAGE. Sciences & Technologie. A, sciences exactes, (17), 107-112. http://revue.umc.edu.dz/index.php/a/article/view/1795

2-M.A. YALLESE et L.BOULANOUAR, Utilisation d'un matériau de coupe de haute technologie dans l'usinage de finition de l'acier 100Cr6 trempé. Communication science et technologie, COST- N°1 Octobre 2002.

3-M.A. YALLESE et L.BOULANOUAR, Etude du comportement à l'usure du CBN7020 lors de l'usinage de l'acier 100Cr6 trempé. Synthèse N°11 Juin 2002.

4-M.A. YALLESE et L.BOULANOUAR, Etude comparative du comportement à l'usure de certaines nuances de céramique de coupe en tournage. Science et technologie N°17, juin 2002, pp 107-112. http://revue.umc.edu.dz/index.php/a/article/view/1795

Scientific conferences

Scientific conferences:

Scientific conferences

Scientific activities

Scientific activities :

Scientific activities

Collaboration and network

Collaboration and network:

Collaboration and network

Honor and distinction

Honor and distinction:

Honor and distinction

Community services

Community services:

Community services

Vertical Tabs

1-Frifita, W., Salem, S. B., Haddad, A., & Yallese, M. A. (2020). Optimization of machining parameters in turning of Inconel 718 Nickel-base super alloy. Mechanics & Industry, 21(2), 203.

https://www.mechanics-industry.org/articles/meca/abs/2020/02/mi190203/mi190203.html

7-Boucherit, S., Berkani, S., Yallese, M. A., Haddad, A., & Belhadi, S. (2019). Dry turning of X2CrNi18-09 using coated carbide tools: modelling and optimization of multiple performance characteristics. Mechanics, 25(6), 487-500. http://www.mechanika.ktu.lt/index.php/Mech/article/view/22367

2018

2017

10-Bouzid, L., Yallese, M. A., & Maaoui, S. (2017). La modélisation en usinage: étude comparative: Comparaison entre les modèles prédictifs de la coupe en utilisant les approches RSM et RNA. Éditions universitaires européennes. http://bib.univ-oeb.dz:8080/jspui/handle/123456789/7690

11-Keblouti, O., Boulanouar, L., Azizi, M. W., & Yallese, M. A. (2017). Effects of coating material and cutting parameters on the surface roughness and cutting forces in dry turning of AISI 52100 steel. Struct. Eng. Mech., 519-526. https://doi.org/10.12989/sem.2017.61.4.519

2016

2-Belhadi, S., Kaddeche, M., Chaoui, K., & Yallese, M. A. (2016). Machining optimization of HDPE pipe using the Taguchi method and Grey relational analysis. International Polymer Processing, 31(4), 491-502.

3-Bensouilah, H., Aouici, H., Meddour, I., Yallese, M. A., Mabrouki, T., & Girardin, F. (2016). Performance of coated and uncoated mixed ceramic tools in hard turning process. Measurement, 82, 1-18. https://www.sciencedirect.com/science/article/pii/S0263224115006843

2015

5-Bouzid, L., Yallese, M. A., Chaoui, K., Mabrouki, T., & Boulanouar, L. (2015). Mathematical modeling for turning on AISI 420 stainless steel using surface response methodology. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229(1), 45-61.

2014

3-Bouacha, K., Yallese, M. A., Khamel, S., & Belhadi, S. (2014). Analysis and optimization of hard turning operation using cubic boron nitride tool. International Journal of Refractory Metals and Hard Materials, 45, 160-178. https://www.sciencedirect.com/science/article/pii/S0263436814000717

4-Bouzid, L., Yallese, M. A., Belhadi, S., Mabrouki, T., & Boulanouar, L. (2014). RMS-based optimisation of surface roughness when turning AISI 420 stainless steel. International Journal of Materials and Product Technology, 49(4), 224-251.

2013

1-Elbah, M., Yallese, M. A., Aouici, H., Mabrouki, T., & Rigal, J. F. (2013). Comparative assessment of wiper and conventional ceramic tools on surface roughness in hard turning AISI 4140 steel. Measurement, 46(9), 3041-3056. https://www.sciencedirect.com/science/article/pii/S0263224113002510

2-Fnides, B., Boutabba, S., Fnides, M., Aouici, H., & Yallese, M. A. (2013). Tool life evaluation of cutting materials in hard turning of AISI H11. Estonian Journal of Engineering, 19(2), 143.

4-Hessainia, Z., Belbah, A., Yallese, M. A., Mabrouki, T., & Rigal, J. F. (2013). On the prediction of surface roughness in the hard turning based on cutting parameters and tool vibrations. Measurement, 46(5), 1671-1681. https://www.sciencedirect.com/science/article/pii/S0263224112005064

5-Zahia, H., Nabil, K., Yalles, M. A., Mabrouki, T., Ouelaa, N., & Rigal, J. F. (2013). Turning roughness model based on tool-nose displacements. Mechanics, 19(1), 112-119. http://www.mechanika.ktu.lt/index.php/Mech/article/view/3612

6-Fnides, B., Boutabba, S., Fnides, M., Aouici, H., & Yallese, M. A. (2013). Cutting tools flank wear and productivity investigation in straight turning of X38CrMoV5-1 (50 HRC). International Journal of Applied Engineering and Technology, 3(1), 1-10.

2012

2-Nabil, K., Zahia, H., Yalles, M. A., & Ouelaa, N. (2012). Statistical analysis of surface roughness by design of experiments in hard turning. Mechanics, 18(5), 605-611. http://www.mechanika.ktu.lt/index.php/Mech/article/view/2704

4-Fnides, B., Berkani, S., Yallese, M. A., Boutabba, S., Rigal, J. F., & Daffrid, S. (2012). Analysis of technological parameters through response surface methodology in machining hardened X38CrMoV5-1 using whisker ceramic tool (Al 2 O 3+ SiC). Estonian Journal of Engineering, 18(1).

2011

2-Fnides, B., Yallese, M. A., Mabrouki, T., & Rigal, J. F. (2011). Application of response surface methodology for determining cutting force model in turning hardened AISI H11 hot work tool steel. Sadhana, 36(1), 109. https://link.springer.com/article/10.1007/s12046-011-0007-7

2010

3-Aouici, H., Yallese, M. A., Fnides, B., & Mabrouki, T. (2010). Machinability investigation in hard turning of AISI H11 hot work steel with CBN tool. Mechanics, 86(6), 71-77.http://www.mechanika.ktu.lt/index.php/Mech/article/view/15967

2009

1-Yallese, M. A., Chaoui, K., Zeghib, N., Boulanouar, L., & Rigal, J. F. (2009). Hard machining of hardened bearing steel using cubic boron nitride tool. Journal of materials processing technology, 209(2), 1092-1104. https://www.sciencedirect.com/science/article/pii/S0924013608002355

2-Fnides, B., Yallese, M. A., Mabrouki, T., & Rigal, J. F. (2009). Surface roughness model in turning hardened hot work steel using mixed ceramic tool. Mechanics, 77(3), 68-73. http://www.mechanika.ktu.lt/index.php/Mech/article/view/15225

3-M.A.Yallese, H.Bouchelaghem, S.Belhadi, K.Bouacha, N.Kribes, Investigation expérimentale sur les efforts et la température de coupe en tournage dur, Communication Science & Technologie n° 7. Janvier 2009 COST.

2008

1-Fnides, B., Yallese, M. A., & Aouici, H. (2008). Comportement à l'usure des céramiques de coupe (Al2O3+ TiC et Al2O3+ SiC) en tournage des pièces trempées. Algerian Journal of Advanced Materials, 5, 121-124.

2-Fnides, B., Yallese, M. A., & Aouici, H. (2008). Hard turning of hot work steel AISI H11: Evaluation of cutting pressures, resulting force and temperature. Mechanics, 72(4), 59-63. http://www.mechanika.ktu.lt/index.php/Mech/article/view/15096

3-Fnides, B., & Yallese, M. A. (2008). Cutting forces and surface roughness in hard turning of hot work steel X38CrMoV5-1 using mixed ceramic. Mechanics, 70(2), 73-78. http://www.mechanika.ktu.lt/index.php/Mech/article/view/15096

4-Fnides B, Yallese M A, Aouici H, Comportement à l’usure des céramiques de coupe (Al2O3+TiC et Al2O3+SiC) en tournage des pièces trempées, Algerian Journal of Advanced Materials, Vol 5, 121(2008), 121-124.

2007

1-Yallese, M. A., Bouchelaghem, H., Belhadi, S., & Kribes, N. (2007). Investigation expérimentale sur l’usure des outils de coupe en CBN lors du tournage des pieces dures. Sciences & Technologie. B, Sciences de l'ingénieur, (26), 15-22. http://revue.umc.edu.dz/index.php/b/article/view/201

2-Kribes, N. r, Ouelaa, N., Yallese, M. A., & Belhadi, S. (2007). Impact of cutting parameters and vibrations on surface roughness based on the linear multiple regression. MATERIAUX & TECHNIQUES, 95(3), 197-203. https://www.mattech-journal.org/articles/mattech/abs/2007/03/mt07031/mt07031.html

4-Bouchelaghem, H., Yallese, M. A., Amirat, A., & Belhadi, S. (2007). Wear behaviour of CBN tool when turning hardened AISI D3 steel. Mechanics, 65(3), 57-65.

5-Yallese M. A, Boulanouar .L, Belhadi .S, Ouelaa .N, Influence des conditions d’usinage sur les efforts de coupe lors du tournage du 100Cr6 (60HRC) avec le CBN. Science & Technologie b – n°25, juin 2007, 7-13.

6-M.A. Yallese, H. Bouchelaghem, S. Belhadi, N. Kribes, Investigation expérimentale sur l’usure des outils de coupe en CBN lors du tournage des pièces dures. Sciences & Technologie b – n°26, décembre (2007), pp 15-22. http://revue.umc.edu.dz/index.php/b/article/view/201

7- Yallese M A, Boulanouar L, Zeghib N, Rigal J-F, Etude des efforts et de la température de coupe lors de tournage dur de l’acier AISI 52100 par un outil CBN. Revue Synthèse, n°16 juin 2007 pp 74-86. https://www.ajol.info/index.php/srst/article/view/117842

8- Belhadi .S, Boulanouar L, Yallese M A, Mabrouki .T, Rigal J-F, Prédiction de la formation du copeau en dents de scie par mesure des efforts. Revue Sciences, Technologies et Développement, n°02, 2007, pp 518.

2005

2004

2003

2-Yallese, M., Boulanouar, L., & Belhadi, S. (2003). Etude de l’endommagement des outils de coupe en céramique noire et en CBN lors du tournage d’un acier durci. Revue de, 1(5), 323-339.

3-M.A. YALLESE, L.BOULANOUAR et S. BELHADI, Endommagement des outils de coupe en céramique (Al2O3 +TiC) et en CBN lors de l’usinage de l’acier trempé X200Cr12. Communication science et technologie, COST- N°2 Décembre 2003.

4- M.A. YALLESE, L.BOULANOUAR et S.BELHADI, Investigation de l’usure de matériaux à outils à base d’alumine-SiCw et de CBN-TiCN lors de l’usinage d’un acier à roulement (60HRC) Science et technologie N°20, Décembre 2003, pp 92-99. http://193.194.84.141/index.php/b/article/view/1264

2002

1-YALLESE, M., & BOULANOUAR, L. (2002). ETUDE COMPARATIVE DU COMPORTEMENT A L’USURE DE CERTAINES NUANCES DE CERAMIQUE DE COUPE EN TOURNAGE. Sciences & Technologie. A, sciences exactes, (17), 107-112. http://revue.umc.edu.dz/index.php/a/article/view/1795

2-M.A. YALLESE et L.BOULANOUAR, Utilisation d'un matériau de coupe de haute technologie dans l'usinage de finition de l'acier 100Cr6 trempé. Communication science et technologie, COST- N°1 Octobre 2002.

3-M.A. YALLESE et L.BOULANOUAR, Etude du comportement à l'usure du CBN7020 lors de l'usinage de l'acier 100Cr6 trempé. Synthèse N°11 Juin 2002.

4-M.A. YALLESE et L.BOULANOUAR, Etude comparative du comportement à l'usure de certaines nuances de céramique de coupe en tournage. Science et technologie N°17, juin 2002, pp 107-112. http://revue.umc.edu.dz/index.php/a/article/view/1795

4-Fnides B, Yallese M A, Aouici H, Comportement à l’usure des céramiques de coupe (Al₂O₃+TiC et Al₂O₃+SiC) en tournage des pièces trempées, Algerian Journal of Advanced Materials, Vol 5, 121(2008), 121-124.

3-M.A. YALLESE, L.BOULANOUAR et S. BELHADI, Endommagement des outils de coupe en céramique (Al₂O₃ +TiC) et en CBN lors de l’usinage de l’acier trempé X200Cr12. Communication science et technologie, COST- N°2 Décembre 2003.

4- M.A. YALLESE, L.BOULANOUAR et S.BELHADI, Investigation de l’usure de matériaux à outils à base d’alumine-SiC_wet de CBN-TiCN lors de l’usinage d’un acier à roulement (60HRC) Science et technologie N°20, Décembre 2003, pp 92-99. http://193.194.84.141/index.php/b/article/view/1264